This machine has been designed in order to produce high quality of interlocks, blocks,curbstones and other concrete products as requested by the customer. One press can produce 42pcs of interlocks or 18 pcs from blocks 20x40x20cm block and curbstones. The machine can be used with a stacking system or without stacking system. The press time is 20-24 seconds. It has two working system, it can work either full automatic or semi automatic depending on user preference.
Movements on the system will be controlled by a PLC. Auto motion system via sensors in automatic machine. Machine press number, unit of productions, problems on the machine can be seen on the PLC touch screen panel.
The stacked Pallet must be transported using a forklift for machines with a stacking system.
The machine works on wooden pallets which are made of pine wood. There are two types of mortar preparation system it can be either manual or with automatic weighing system after the cement is dosed sand is been weighed then transported up to the mixer water is added then the all is mixed until a homogeneous mortar is obtained.
Robot sequences the products by the help of wooden pallet one after the other. Robot movements will be directed from hydraulic and hydraulic piston. This is considered as an additional unit independent from the machine. Also the machine has double mortar bunker but if you do not want to second surface on bordure or interlock paver the machine can be produce with single mortar bunker.
• Machine Operation System
Full Automatic PLC Control System KB-42
• Machine Produces
120-130 pallet / hour
• Machine Weight
• Bunker Capacity
• Hydraulic Oil Capacity
• Machine Dimensions
• Vibration Power Above
3 kw x 4 pcs
• Vibration Power Below
5.5 kw x 6 pcs
• Total Machine Power Usage
• Minimum Product Height
• Maximum Product Height
• Vibration Cooling Capacity
• Vibration Press Power
• Press Capacity
Interlock paving stone 5850 pcs / hour -1200 m2 in 8 hours- block 2350 pcs / hour
• The Number Of Products on a Pallette
42 pcs interlock 18 pcs block 20x40x20
• Wooden Pallet Dimensions
135x140x6cm system with self- without foot 145x140x6cm (23 cm Profil Foot) Stacking system
Curing chamber Cubing system Transporatation system Finger car Elavating & Lowering devices Pallet recycling